Frage zum Produkt senden

Um uns eine Frage zu diesem Produkt zu schicken, füllen Sie einfach alle mit * markierten Felder aus und klicken Sie auf "Absenden".

Preis inkl. MwSt., zzgl. Versand (ausgenommen Fachzeitschriften)

M.Sc. Sipi Seisko, M.Sc. Otto Forsström, Dr. Jari Aromaa, Prof. Mari Lundström

Currently, cyanide is the dominant lixiviant used in gold leaching. However, there is demand for noncyanide
lixiviants due to several environmental disasters, e.g. in Baia Mare in Romania in 2000 [1, 2].
The use of cyanide has been limited or forbid by legislation in many countries and/or territories [1].
Therefore, alternative leaching solutions have been investigated, and chlorides are proposed as one of
the most promising lixiviants for gold due to the high dissolution rates [3]. In order to dissolve gold,
strong oxidant is required [4]. When using ferric and cupric ions and/or complexes as oxidants in gold
leaching, Fe(III) and Cu(II) are reduced into Fe(II) and Cu(I), respectively. These ferrous and cuprous
ions can be further oxidized in the presence of oxygen, which is the major advantage of chloride
leaching compared to cyanide and thiourea [5, 6].
In this study, gold dissolution in chloride solutions was investigated by quartz crystal microbalance
(QCM) with ferric and cupric ions and/or chloride complexes as oxidants originating from FeCl3,
Fe2(SO4)3, CuCl2 and CuSO4 (0.02 – 1.0 M). The source of oxidant and the effect of its concentration
as well as the redox potential during leaching were studied, while the chloride concentration (3 M),
pH (1.0) and temperature (95 °C) were fixed. With ferric ions, higher dissolution rates were achieved
compared to cupric with all investigated oxidant sources. Ferric and cupric ions originating from
chloride salts (FeCl3 and CuCl2) were shown to result in higher gold dissolution rates compared to
corresponding sulfate salts as oxidant source. The redox potentials of the solutions were shown to
increase with increasing oxidant concentration, from 683 to 740 mV vs. SCE with ferric and from
586 to 674 mV vs. SCE with cupric. The best gold dissolution rates, achieved with 0.5 M oxidant
concentration, were 1.34·10-4 and 1.66·10-5 mol s-1 m-2 with ferric and cupric ions, respectively.
Additionally, QCM results were compared to the results of rotating disc electrode (RDE) measurements
in order to investigate the oxidation state of gold in chloride leaching. It can be suggested that
with both oxidants, the oxidation state of gold is +1 instead of +3.

Ihre Frage an uns
Wenn Sie Ihre Telefonnummer angeben, rufen wir Sie auch gern zurück.
E-Mail-Adresse *
Frage *

Datenschutz: Ihre Angaben werden nur benutzt, um diese Anfrage zu beantworten. Wir werden diese Daten keinesfalls zu anderen Zwecken verwenden. Weitere Informationen finden Sie unter Datenschutz.